It turned out that the trailer frame has a slight bow to it, it curves up at the ends, so to build off of a flat deck I have added some shims that will be glued to the bottom of the deck. These shots show the first bit of work to make the deck.
 |
| © Peter Mitchell |
The plan is to make most of the deck as a structured panel using 3/8" plywood with rigid foam insulation glued in between. Here is the first layer of plywood.
 |
| © Peter Mitchell |
As you can see the deck does not just sit between the wheels, I am building up and over the wheel wells.
 |
| © Peter Mitchell |
No comments:
Post a Comment